What is the problem of no display when the industrial computer is started?

Industrial computer motherboard is the motherboard of industrial computers used in industrial occasions. According to needs, it can adapt to a wide temperature environment, can adapt to harsh environments, and can work with high loads for a long time. It may be because the application requirements of the working environment are more stringent, so the industrial control motherboard is also one of the most faulty components of all industrial computer components. This field has also attracted the attention and research of many production equipment engineers and technicians. We mainly use industrial control computers. There is no display problem at startup.

When the boot failure of the industrial computer is not displayed, the first thing we need to check is the BIOS setting of the industrial computer. The BIOS of the industrial control motherboard stores important hardware data, and the BIOS is also a part of a fragile industrial control motherboard, which is easily damaged. Once damaged, the system cannot run. Such failures are usually caused by the destruction of the motherboard BIOS by the CIH virus (of course, also It does not rule out the failure of the system caused by the motherboard itself. So we can check whether the hard disk data is intact to determine whether the BIOS is damaged and whether the hard disk data is intact.

In addition, there are three situations that will not be displayed when the device is started.

1. There is a problem with the expansion slot or expansion card of the industrial control motherboard. Therefore, after inserting an expansion card such as a sound card, the motherboard does not respond and there is no display

2. The CPU frequency set by the non-jumping motherboard in CMOS is incorrect, which may cause the display to fail.

3. The motherboard cannot recognize the memory of the industrial computer, and memory damage or memory mismatch will also cause no display failure when booting.

Well,Today GREATZC TECHNOLOGY LIMITED have talked with you What is the problem of no display when the industrial computer is started?Are you clear now?

If there’s any need or inquiry,pls feel free to contact us website: https://www.greatzc.net  

Email:greatzc@industrialpc-motherboard.com Skype:Greatzc02 Mobile:+86-1789846900